The new NoiseTaker Series is build with nothing in mind other than performance. They meet and exceed the Intel ATX12V Ver. 1.3 power supply design guide requirements, and are the very first of its kind to sport dual +12V rails that separate unwanted noise interference from your CPU.

Features:

• Active PFC Function: PF Value 0.99 under condition of 230VAC/50Hz at full load.
• Smart fan: After PC shuts down, cooling fans keep running for at least 2 minutes to effectively cool down parts and hardware's inside PSU and PC cases. Thus, ensure longer product life time of power supply and hardware's inside PC case.
• Separate 12V rails: Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety requirements
• ATX 12V V1.3 compatible: Support latest P4 and Athlon 64 platforms. For P4 platforms use 865 (Springdale) & 875 (Canterwood) chipset's and even new P4 Prescott and AMD Athlon 64 or later CPU.
• S-ATA connectors: Connect your system to the faster S-ATA interface for better performance.
• Manual and automatic fan speed control: 8cm & 9cm fans automatically controlled by thermostat plus rheostat control over 8cm fan. Enable users to keep the balance between cooling effect and acoustic noise.
• Extra Power connector: Extra 4-pin power connector provides high-end graphic card with stable current.
• Reliability: OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well-guarded from any dangers. Maximize safety for your hardware and valuable data.
• Copper-shielding: Effectively reduces electro-magnetic interference that might affect MB and CPU from normal operation. (Valid for models with 370W and higher total power)
• Dual Fan: The best cooling method for PC system, and is strongly suggested by AMD.
• Silence: Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and smooth mechanical design of fan guards.
• FM & FC functions: RPM signal of 8cm exhaust fan is provided; allows MB to on/off control 8cm exhaust fan.

Specifications:

• Maximum Power: 485W
• Input Voltage: 95V~265V (adjusted automatically)
• Input Frequency Range: 47Hz~63Hz
• Input Current: 80A / 230V and 40A / 115Vmax. during cold start
• Hold up time: 17ms at 115VAC or 230VAC, full load
• Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
• Over Load Protection: 110~160% of max load
• Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
• Over Temperature Protection: Operating Ambient 10¦C~40¦C, Storage Ambient -40¦C~70¦C
• Humidity: Operating: to 85% relative humidity, non condensing at 25¦C; Storage: to 95% relative humidity, non condensing at 50¦C
• MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25¦C ambient
• EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
• Safety Approval: UL, cUL, VDE, CB, DEMKO, FIMKO, NEMKO, SEMKO
• Dimension: W150 x H86 x D140 (mm)